Input from our factory team and our passion for technical singletrack have led us to design a refined downcountry capable trail hardtail. The Sendero is built to excel in the varied untamed trails most of us have access to. Inspired to unlock the rock gardens and ledge lines found across Austin’s mountain biking trails. If you go out of your way to ride the hard line, we made this bike for you. The Sendero stands out from other bikes in the category with a higher bottom bracket and steeper seat tube than many other options. The reach is optimized for precise steering with stem lengths between 35mm and 70mm. Travel options are 120mm or 130mm travel. The super short 420mm rear end can clear up to a 29x2.8” tire due to sliding PMW Stainless dropouts. The Sendero represents a balanced and versatile offering in the burgeoning downcountry category. Scroll down to order or see more.
The Sendero utilizes a short 420mm chain-stay & a long reach to position the rider to stick corners and pedal efficiently while keeping the bike incredibly playful.
Paired to the head tube and seat tube angles the design is made to confidently huck ledges and bomb descents.
A balanced Bottom Bracket: Positioned to bring out the rest of the geometry and give clearance to pedal through technical rock gardens, climb with power and stay flickable.
Smooth and predictable compliance from CHUMBA Oversized Select Double Butted Tubing, built of the best tubing available.
The Sendero steel is designed to unlock technical trail features, put a smile on your face and of course to SEND IT!
Made in house/USA quality
CHUMBA Oversized Select Double Butted Tubing and PMW stainless steel sliding dropouts, mean this bike will exceed your expectations and provide years of reliable trail service. Oversized tubing yields larger tube miters for strength.
Seat-stays and chain-stays are a size up from our XC/trail Stella design.
A custom bent seat tube brings together a short rear end, steep seat tube angle and maximum tire clearance.
Clean thoughtful cable routing
Flawless frame miters, all tubes are heat sunk and argon purged when welded to prevent distortion and material thinning.
Sendero Frame or Build
To customize the Sendero use the drop downs below
SEndero Frame Specs and compatibility
The Sendero mountain bike is designed to be extremely compatible with a wide range of tire sizes, hub options and fork lengths.
Suggested Stem Lengths: 120mm travel 40 - 70mm, 130mm travel 35 - 65mm
Covert Dropper Routing Included: External under down tube and then going into a internal port at the non-drive side of the seat tube.
Cable Routing: Standard cable routing goes under the down tube via PMW bolt on cable guides and then onto the chain-stays. Top tube cable routing for shorter brake housing or external droppers can be added for $50
Hub Spacing: 148x12 Boost or 142x12/135x10 on request
PMW Sliding Dropout Options: Geared, single speed or Rohloff, thru axle or quick release
Max Tire Clearances: 29 x 2.8" tires or 27plus x 3.0" in the Boost size.
Headset S.H.I.S.: ZS44 Upper/ EC44 Lower for Tapered or Straight Forks
Fork Travel: 110mm/120mm/130mm geometry capable. Optimized for 120mm.
Seat Post: Post 31.6mm / Clamp 35mm
Bottom Bracket: 73 English Threaded BSA
Chainring/Chain-line: 1x up to a 34T on standard chain-line (50/51mm), 34T oval on Boost chain-line (51/52mm)
H20 Capacity: 3 bottles on Sizes XL, L, & M
The Sendero Steel 29er is available as a frame only, frame set, in complete build kits, and partial builds. Full custom component configurations can be quoted on request.
You can order a Sendero direct from Chumba over the website using the drop-downs on this page, over the phone, in person @ our Headquarters or from an approved Chumba Dealer. We welcome calls (512) 494-4944 and emails for immediate questions.